Skip to Main Content

My CARSTAR: Location not set

Locate Me

Disassembly Technician

CARSTAR Alan Conner Collision Center - Chester
Chester, VA, 23831

JOB SUMMARY


The Disassembly Technician is responsible for disassembling, inspecting and assessing vehicles for additional or hidden damage. This includes removing all damaged parts and writing a detailed list of supplemental damage found and reporting it to the assigned Estimator. Additional duties include light auto body repairs.


DUTIES / RESPONSIBILITIES


• Follow CARSTAR’s blueprinting process and disassembly procedures (DFR) for all vehicle inspections.
• Disassemble vehicles after the initial estimate, inspect all vehicles for internal structure and parts from the initial inspection (estimate) and identify additional damage.
• Document and record additional damage and required parts on a damage report (including blend panels, small parts, on-time use fasteners and moldings, etc.).
• Notify the Production Manager / Estimator regarding supplements based on additional damage/parts discovered.
• Assist the Metal Technician with reassembly upon completion of the repair, as needed.
• Perform light non-structural repairs – light finishing, sanding, minor bumper repairs, etc.
• Reassemble vehicle – replace final moldings, trim and detail pieces.
• Perform assigned duties in a safe and responsible manner that does not expose yourself or other employees to unnecessary risk of injury.
• Attend daily release meetings.
• Other duties as assigned.


EXPERIENCE / SKILL REQUIREMENTS


• High School diploma required, collision vocational graduate preferred.
• Prior knowledge of blueprinting or disassembly experience preferred.
• I-CAR, ASE training or other industry training preferred.
• Prior experience with hand tools used for vehicle disassembly.
• Ability to working independently without close supervision.
• Valid driver’s license and insurable driving record.


PHYSICAL REQUIREMENTS


Essential physical requirements include:
• Ability to stoop, bend and kneel, push and pull
• Carry and lift heavy objects (up to 50lbs)
• Standing, sitting and walking
• Performing repetitive motions


WORK ENVIRONMENT


Exposure to:
• Paint, fumes and particles
• Dirt / Dust
• Chemicals / Toxins
• Varying heat / cold
• Intermittent noise

*All duties, responsibilities and experience are subject to change by location

 

Apply Now